commit bbdb7f07d629c1d977d4c5e62e70ce45fa4eaaf9 Author: carlos Date: Thu May 22 18:07:36 2025 -0600 initial commit diff --git a/Development/Archive.prj b/Development/Archive.prj new file mode 100644 index 0000000..0afab46 Binary files /dev/null and b/Development/Archive.prj differ diff --git a/Development/cr_barn5-AllUsers.opt b/Development/cr_barn5-AllUsers.opt new file mode 100644 index 0000000..c3cefcf Binary files /dev/null and b/Development/cr_barn5-AllUsers.opt differ diff --git a/Development/cr_barn5-User-ATOM-CRDESKTOP.opt b/Development/cr_barn5-User-ATOM-CRDESKTOP.opt new file mode 100644 index 0000000..ce23a6d Binary files /dev/null and b/Development/cr_barn5-User-ATOM-CRDESKTOP.opt differ diff --git a/Development/cr_barn5.Device.Application.74ccca2f-50e3-4d5a-9d7a-9fd420284f83.bootinfo b/Development/cr_barn5.Device.Application.74ccca2f-50e3-4d5a-9d7a-9fd420284f83.bootinfo new file mode 100644 index 0000000..f4144b1 Binary files /dev/null and b/Development/cr_barn5.Device.Application.74ccca2f-50e3-4d5a-9d7a-9fd420284f83.bootinfo differ diff --git a/Development/cr_barn5.Device.Application.74ccca2f-50e3-4d5a-9d7a-9fd420284f83.bootinfo_guids b/Development/cr_barn5.Device.Application.74ccca2f-50e3-4d5a-9d7a-9fd420284f83.bootinfo_guids new file mode 100644 index 0000000..3174e41 Binary files /dev/null and b/Development/cr_barn5.Device.Application.74ccca2f-50e3-4d5a-9d7a-9fd420284f83.bootinfo_guids differ diff --git a/Development/cr_barn5.Device.Application.74ccca2f-50e3-4d5a-9d7a-9fd420284f83.compileinfo b/Development/cr_barn5.Device.Application.74ccca2f-50e3-4d5a-9d7a-9fd420284f83.compileinfo new file mode 100644 index 0000000..f4144b1 Binary files /dev/null and b/Development/cr_barn5.Device.Application.74ccca2f-50e3-4d5a-9d7a-9fd420284f83.compileinfo differ diff --git a/Development/cr_barn5.Device.Application.xml b/Development/cr_barn5.Device.Application.xml new file mode 100644 index 0000000..316c8de --- /dev/null +++ b/Development/cr_barn5.Device.Application.xml @@ -0,0 +1,2373 @@ + + +
+ 3.5.14.0 + + +
+ + + + + + + + + + + + + + + + + + + + + + + + + + Detects a falling edge of a boolean signal + + .. code-block:: codesys + + (* Example declaration *) + FTRIGInst : F_TRIG ; + + (* Example in ST *) + FTRIGInst(CLK := VarBOOL1); + VarBOOL2 := FTRIGInst.Q; + + .. cds:ranges:: + + :CLK: [TRUE,FALSE] + :~CLK_OLD: [TRUE,FALSE] + :Q: [TRUE,FALSE] + + + Boolean signal to be checked + + + ``TRUE``: Falling edge detected + + + + + + + + + + + Realizes a bistable reset-dominat latch + + .. cds:ranges:: + + :SET: [TRUE,FALSE] + :RESET1: [TRUE,FALSE] + :~Q1_IN: [TRUE,FALSE] + :Q1: [TRUE,FALSE] + + .. code-block:: codesys + + (* Example declaration *) + RSInst : RS ; + + (* Example in ST *) + RSInst(SET:= VarBOOL1 , RESET1:=VarBOOL2 ); + VarBOOL3 := RSInst.Q1 ; + + + Rising edge: Set ``Q1`` to ``TRUE`` + + + + Output value + + + + <description>Time and date in structured</description> + + <element="wYear" type="IN">Year (e.g. 2006)</element> + + + <element="wMonth" type="IN">Month (1..12: January = 1, December = 12)</element> + + + <element="wDay" type="IN">Day of month (1..31)</element> + + + <element="wHour" type="IN">Hours after midnight (0..23)</element> + + + <element="wMinute" type="IN">Minutes after hour (0..59)</element> + + + <element="wSecond" type="IN">Seconds after minute (0..59)</element> + + + <element="wMilliseconds" type="IN">Milliseconds after second (0..999). Optional!</element> + + + <element="wDayOfWeek" type="IN">Day of week (1..7: Monday = 1, Sunday = 7</element> + + + <element="wYday" type="IN">Day of year (1..365): January 1 = 1, December 31 = 364/365</element> + + + + Detects a rising edge of a boolean signal + + .. code-block:: codesys + + (* Example declaration *) + RTRIGInst : R_TRIG ; + + (* Example in ST *) + RTRIGInst(CLK := VarBOOL1); + VarBOOL2 := RTRIGInst.Q; + + .. cds:ranges:: + + :CLK: [TRUE,FALSE] + :~CLK_OLD: [TRUE,FALSE] + :Q: [TRUE,FALSE] + + + Boolean signal to be checked + + + ``TRUE``: Rising edge detected + + + + Implements a timer with a turn-off delay + + .. code-block:: codesys + + (* Example declaration *) + TOFInst : TOF ; + + (* Example in ST *) + TOFInst(IN := VarBOOL1, PT:= T#5s); + VarBOOL2 := TOFInst.Q; + + .. image:: @(Tof) + + .. cds:ranges:: + + :IN: [TRUE,FALSE] + :PT: [0..255] + :~PT_OLD: [0..255] + :Q: [TRUE,FALSE] + :ET: [0..4294967295] + + + | Falling edge: starts delay counter + | Rising edge: resets delay counter + + + Time for the delay counter [ms] + + + | ``TRUE`` if ``IN`` is ``TRUE`` + | ``FALSE`` if ``IN`` is ``FALSE`` and delay time ``PT`` elapsed + + + Elapsed time since falling edge at ``IN`` + + + + Implements a timer with a turn-on delay + + .. code-block:: codesys + + (* Example declaration *) + TONInst : TON ; + + (* Example in ST *) + TONInst(IN := VarBOOL1, PT:= T#5s); + VarBOOL2 := TONInst.Q; + + .. image:: @(Ton) + + .. cds:ranges:: + + :IN: [TRUE,FALSE] + :PT: [0..255] + :~PT_OLD: [0..255] + :Q: [TRUE,FALSE] + :ET: [0..4294967295] + + + | Rising edge: starts delay counter + | Falling edge: resets delay counter + + + Time for the delay counter [ms] + + + | ``FALSE`` if ``IN`` is ``FALSE`` + | ``TRUE`` if ``IN`` is ``TRUE`` and delay time ``PT`` elapsed + + + Elapsed time since rising edge at ``IN`` + + + + Implements a pulse timer + + .. code-block:: codesys + + (* Example declaration *) + TPInst : TP ; + + (* Example in ST *) + TPInst(IN := VarBOOL1, PT:= T#5s); + VarBOOL2 := TPInst.Q; + + .. image:: @(Tp) + + .. cds:ranges:: + + :IN: [TRUE,FALSE] + :PT: [0..255] + :~PT_OLD: [0..255] + :Q: [TRUE,FALSE] + :ET: [0..4294967295] + + + Rising edge starts the pulse timer and sets ``Q`` to ``TRUE`` + + + Length of the pulse (high-signal) + + + Pulse signal, set to ``TRUE`` for ``PT`` milliseconds if ``EN`` has a rising edge + + + Elapsed time since pulse timer started. It will then remain constant after ``PT`` is reached. + + + + + + + + + + + + + + + + + Auto / Manual - On/Off control + + If in auto then on + + + Auto / manual mode + + + IF in manual then on + + + On output + + + + + Curve point is enabled + + + + + + + + + + + + + Default to False but can be inverted if Need Be + + + + + + + + + + + + + + Inrush delay in ms, don't start until this time is in the past + + + Number of devices in list + + + Number of machines in list + + + Number of gadgets in the list + + + + + + + + + + + + + + current value in + + + filter time in seconds + + + filtered value + + + + + Name of item + + + + + + + + + + The mode is not set, used to clear the setMode setting + + + Don't use this bin + + + Primary premix + + + Backup premix - used when the primary premix runs out + + + Wheat + + + + + + + + + + Calculate target weight for the active ingredient + + + Filling to target weight + + + Wait for stable after filling + + + Move to next ingredient + + + Wait for weigh hopper to be empty + + + Dump weigher + + + Delay to allow dump to close + + + + + + + + + + + Clamp output between outMin and outMax + + + + + + + + + + + + Clamp output between outMin and outMax + + + + + + System Enable, bypassed on disable + + + Demand given to run + + + Has Permission to run + + + This is set from device fault. + + + Motor is running, used for VFD to know when it has stopped + + + Motor Up to Speed + + + Parent gives permission to run + + + Delay after starting before ready + + + Delay after request to run removed before stopping + + + Ready for product + + + Run output + + + Start delay done + + + Stop delay done + + + Start delay elapsed time + + + Stop delay elapsed time + + + Request to run status + + + Start delay is active + + + Stop delay is active + + + Start or stop delay active + + + Sum of in_runPerm and dep.runPerm + + + + Tracks run time in seconds + + + Tracks time since start in seconds + + + + + enable for various control schemes + + + + + + + + + Running timer that can be reset + + System time when last reset + + + ms since timer reset + + + Whole seconds since timer reset + + + REAL seconds since timer reset + + + + Write to system log +Needs Element Collections library + + The text that will be in the Component column in the log. This is meant to only be set once and then left the same + + + Used to only have the logger enabled at specific time, like when debugging + + + Component Id + + + Message from last write + + + + + Offset from UTC in minutes + + + Adjustment from hardware real time clock + + + + + + + + + The major version number. This is typically incremented for significant releases that may include major new features or changes. + + + The minor version number. This is incremented for releases that add smaller features or improvements and may include significant fixes. + + + The service pack number. This is used to indicate updates that usually include bug fixes, performance improvements, and minor feature enhancements. + + + The patch number. This is incremented for very small changes or bug fixes that do not significantly alter the functionality. + + + + + + + + + + + + + + + + + + + + + + + + + + Simulates a blinking signal (turning on and off for specific durations) + + | ``TRUE``: Starts blinking + | ``FALSE``: Stops blinking whereas ``OUT`` keeps its value + + + Time for ``OUT`` to be ``FALSE`` + + + Time for ``OUT`` to be ``TRUE`` + + + Output value, starts with ``FALSE`` and switches between ``TRUE`` and ``FALSE`` for the given high and low times + + + + + + <description>Time and date in structured</description> + + <element="wYear" type="IN">Year (e.g. 2006)</element> + + + <element="wMonth" type="IN">Month (1..12: January = 1, December = 12)</element> + + + <element="wDay" type="IN">Day of month (1..31)</element> + + + <element="wHour" type="IN">Hours after midnight (0..23)</element> + + + <element="wMinute" type="IN">Minutes after hour (0..59)</element> + + + <element="wSecond" type="IN">Seconds after minute (0..59)</element> + + + <element="wMilliseconds" type="IN">Milliseconds after second (0..999). Optional!</element> + + + <element="wDayOfWeek" type="IN">Day of week (1..7: Monday = 1, Sunday = 7</element> + + + <element="wYday" type="IN">Day of year (1..365): January 1 = 1, December 31 = 364/365</element> + + + + + + + + + + + + + + + + + + Alarm will remain active until reset + + + Alarm will reset when source resets + + + Latched or unlatched as specified in the program + + + + + + input index + + + High output index + + + Low output index + + + Ratio between low and high + + + loop VAR + + + Highest valid curve idx + + + + + + This should not be set, but is an input to be able to set attributes of this. + + + This devices parent. + + + Motor Faulted - VFD fault or overload trip - this will not run in manual or auto + + + Disable sequence, for standalone device + + + Demand to run in auto - normally set by seq controller. + + + + Name of this device eg M03_01 Inc Drag + + + Rated power in kw + + + Pauses this device and its gadgets + + + Demand to run in auto, adds pause and inrush control to the in_autorun + + + Run output + + + In Auto from sequence, in manual TRUE + + + + In Auto from sequence, in manual TRUE + + + Color used to indicate state + + + A depenedent has a fault + + + Power draw in watts + + + This device is pauses and won't start + + + Device is waiting for inrush from another motor to decay before it starts + + + Auto / manual + + + Tracks run time in seconds + + + Tracks time since start in seconds + + + + List of all devices + + + + + Name of item + + + + + + Name of item + + + + + One of many ingredients for a mixer + + Output control + + + Reset totals at midnight + + + Display name for ingredient or bin + + + The mode for this ingredient. DO NOT SET THIS DIRECTLY. Use the setMode variable + + + Current amount in this bin (kg) + + + This ingredient timed out while filling + + + For Ingredient list on atom hmi + + + Amount used today (kg) + + + Desired mode for this ingredient + + + Amount of mix desired in percent, this is the initial amount entered (kg) + + + Amount of mix desired in kg, converts the percent to kg based on the size of the mixing container (kg) + + + Amount of mix desired including error correction for previous mix actual amount (kg) + + + Load cell weight at which to stop the auger (kg) + + + Mix weight actually added for this batch (kg) + + + Freefall from last fill (kg) + + + Accumulated error from previous + + + + + Rollover pulse to clear today and update totals + + + + + Number of birds placed + + + Number of birds dead today + + + + Total dead since placed not counting today + + + Rollover trigger + + + + + + + + + + enable for various control schemes + + + Min Setpoint + + + Max Setpoint + + + + + + + + Run Demand + + + Todo Future rename to outofRange to use for above or below (i.e Humidity ctl when top stage is active to deactivate hu control + + + + + + + + + + + + + + Channel input is underrange + + + Channel input is overrange + + + Card fault + + + Channel is faulted, underrange, overrange or card fault. + + + Alarm reset + + + Raw input + + + Comms, power supply, or card fault + + + Channel overrange setpoint, used to manually calculate overrange + + + Channel underrange setpoint. used to manually calculate underrange + + + + + Keys for curve + + + Data for curve + + + Desired key at which to get the curve values + + + Output type of the curve, stepped or smooth + + + Manual setpoint. Indicates the curve output when in auto + + + Auto/manual mode + + + output value, either from the curve or the manual setpoint + + + output from the curve + + + Function to get the to index values that surround the desired key value + + + scaling function for smooth result + + + + + Card fault + + + Channel is faulted, underrange, overrange or card fault. + + + Alarm reset + + + Comms, power supply, or card fault + + + channel fault + + + + + This should not be set, but is an input to be able to set attributes of this. + + + This devices parent. + + + Motor Faulted - VFD fault or overload trip - this will not run in manual or auto + + + Disable sequence, for standalone device + + + Demand to run in auto - normally set by seq controller. + + + + Name of this device eg M03_01 Inc Drag + + + Rated power in kw + + + Pauses this device and its gadgets + + + Demand to run in auto, adds pause and inrush control to the in_autorun + + + Run output + + + In Auto from sequence, in manual TRUE + + + + In Auto from sequence, in manual TRUE + + + Color used to indicate state + + + A depenedent has a fault + + + Power draw in watts + + + This device is pauses and won't start + + + Device is waiting for inrush from another motor to decay before it starts + + + Auto / manual + + + Tracks run time in seconds + + + Tracks time since start in seconds + + + + List of all devices + + + Motor is up to speed. External input (e.g speed sensor) - Defaults true + + + Maximum manual on time + + + Delay time remaining for start or stop delay + + + Delay timer is active + + + + + + Name of index item. eg. Age + + + The index of the first displayed row + + + Count of the rows that are currently in use + + + Max size for scroll bar + + + Page size for scroll bar + + + Loop Var + + + + + + + Name of item + + + + + + + + + + + + + Process controlled enable. eg only enable rpm lo when motor running + + + + + + once running this will prevent a quick spike + + + allows machine to clean out before starting back up + + + process enable delay on + + + process enable delay off + + + + + This should not be set, but is an input to be able to set attributes of this. + + + This devices parent. + + + Motor Faulted - VFD fault or overload trip - this will not run in manual or auto + + + Disable sequence, for standalone device + + + Demand to run in auto - normally set by seq controller. + + + + Name of this device eg M03_01 Inc Drag + + + Rated power in kw + + + Pauses this device and its gadgets + + + Demand to run in auto, adds pause and inrush control to the in_autorun + + + Run output + + + In Auto from sequence, in manual TRUE + + + + In Auto from sequence, in manual TRUE + + + Color used to indicate state + + + A depenedent has a fault + + + Power draw in watts + + + This device is pauses and won't start + + + Device is waiting for inrush from another motor to decay before it starts + + + Auto / manual + + + Tracks run time in seconds + + + Tracks time since start in seconds + + + + List of all devices + + + Manual Start + + + Manual Stop + + + Motor is up to speed. External input (e.g speed sensor) - Defaults true + + + Maximum manual on time + + + Delay time remaining for start or stop delay + + + Delay timer is active + + + + A gadget has a fault + + + + + Gets the time from the real time clock + + + global settings + + + UTC time of day in ms since midnight + + + + + + + Local time of day + + + + + + + + + + + + Raw input + + + Alarm reset + + + Indicates the the value at raw is now valid. Used at startup to delay updates until remote I/O has replied + + + fault + + + input used as an alarm + + + + Invert Function Defaults to False + + + + Raw input value + + + Debounced Input + + + Output is valid. Used to delay using the value until startup overhead is complete, like waiting for remote I/O to respond + + + + + + + + + + + + + + top of stage + + + bottom of stage + + + + + + + + Current Temperature + + + For Humidity to enable below and out_ctl + + + For Humidity ctl to disable fixed devices from running when below set Humidity range + + + + + + + + + For Humidity ctl to show when devices are being controlled via humidity stage + + + + + + data for curve + + + + + + + + + Temperature auto / manual + + + Temperature manual setpoint + + + The key to select the current curve index. Likely bird age + + + + Temperature output + + + + + + + + + + + + + + Raw input + + + Calibrate min value to current input level + + + Calibrate max value to current input level + + + Alarm reset + + + Indicates the the value at raw is now valid. Used at startup to delay updates until remote I/O has replied + + + Limit inputs + + + Scaling Raw Input to percent + + + Scaling percent to EU + + + fault inputs + + + Filtering from the scaling EU + + + Signal value, depending on input type + + + Name the atAI for HMI visualization + + + For using a text list in Webvisu if Persistant Variable Space is Limited (i.e. Using a Productivity PLC vs Raspberry) + + + Converts to Ms DINT for easy HMI entry + + + Scaled value + + + Filtered and scaled value + + + Output is ready for use. + + + + + + + Start time with offset + + + Stop time with offset + + + Time to check if it is between the start and stop times + + + On if actual is between start and stop + + + ratio if postition between start and stop + + + Function to scale transition + + + + + + This should not be set, but is an input to be able to set attributes of this. + + + This devices parent. + + + Motor Faulted - VFD fault or overload trip - this will not run in manual or auto + + + Disable sequence, for standalone device + + + Demand to run in auto - normally set by seq controller. + + + + Name of this device eg M03_01 Inc Drag + + + Rated power in kw + + + Pauses this device and its gadgets + + + Demand to run in auto, adds pause and inrush control to the in_autorun + + + Run output + + + In Auto from sequence, in manual TRUE + + + + In Auto from sequence, in manual TRUE + + + Color used to indicate state + + + A depenedent has a fault + + + Power draw in watts + + + This device is pauses and won't start + + + Device is waiting for inrush from another motor to decay before it starts + + + Auto / manual + + + Tracks run time in seconds + + + Tracks time since start in seconds + + + + List of all devices + + + Motor is up to speed. External input (e.g speed sensor) - Defaults true + + + Maximum manual on time + + + Delay time remaining for start or stop delay + + + Delay timer is active + + + + In auto position demand + + + Extend Command + + + Retract Command + + + Stop Manual Movement + + + + Position demand + + + + For controlling inlet fans if applicable + + + + + + Manual Position setting + + + Delay to allow for in position + + + Motion deadband in percent / second + + + How long before no motion triggers a stall + + + Delay for at Position Timer + + + Pulse on Time MS + + + Pulse off Time MS + + + Enable Stalled shutdown defaults to FALSE + + + Open demand + + + Close demand + + + At position confirmation + + + Position active or above zero position + + + Stalled alarm + + + + Inlet fan variable speed demand + + + Inlet fan fixed run command + + + Actual Position + + + + Time since start in seconds + + + Allowed error margin + + + Delay for minor adjustments before Declaring at Position + + + Start At Position Delay Timer + + + Toggles for out_open + + + Toggles for out_close + + + + + + + + Toggle duration (1 second) + + + Toggle duration (1 second) + + + + + + + + + + + + + + + Keys for curve + + + Data for curve + + + Time zone settings + + + Desired key at which to get the curve values + + + Output type of the curve, stepped or smooth + + + output value + + + Loop variable + + + + + empty container for calculated values + + + + + Raw input + + + Calibrate min value to current input level + + + Calibrate max value to current input level + + + Alarm reset + + + Indicates the the value at raw is now valid. Used at startup to delay updates until remote I/O has replied + + + Limit inputs + + + Scaling Raw Input to percent + + + Scaling percent to EU + + + fault inputs + + + Filtering from the scaling EU + + + Signal value, depending on input type + + + Name the atAI for HMI visualization + + + For using a text list in Webvisu if Persistant Variable Space is Limited (i.e. Using a Productivity PLC vs Raspberry) + + + Converts to Ms DINT for easy HMI entry + + + Scaled value + + + Filtered and scaled value + + + Output is ready for use. + + + + + + + + + + + + + + + + User can calibrate loadcell if the three possible inputs have been populated + + + User can zero scale manually + + + If Enabled it will allow program to auto zero + + + + + + + + + + + + + + + + + + Offset from setpoint to the top of the highest stage + + + Offset from setpoint to the bottom fo the lowest stage + + + Current temperature input + + + + + + + + Number of stages + + + Gap between stages where nothing changes + + + Setpoint + + + + + Loop variable + + + total span from bottom of first stage to top of last stage + + + + + + + + + + Raw input + + + Calibrate min value to current input level + + + Calibrate max value to current input level + + + Alarm reset + + + Indicates the the value at raw is now valid. Used at startup to delay updates until remote I/O has replied + + + Limit inputs + + + Scaling Raw Input to percent + + + Scaling percent to EU + + + fault inputs + + + Filtering from the scaling EU + + + Signal value, depending on input type + + + Name the atAI for HMI visualization + + + For using a text list in Webvisu if Persistant Variable Space is Limited (i.e. Using a Productivity PLC vs Raspberry) + + + Converts to Ms DINT for easy HMI entry + + + Scaled value + + + Filtered and scaled value + + + Output is ready for use. + + + + + Therm Type (i.e 1 = 3K) + + + Resistor Value (i.e. 3267) + + + In Supply Voltage + + + + + + + + Raw count from IO + + + Alarm reset + + + + Resets Current Day total + + + Time Period for averaging + + + To Convert Counts to Hz (eg. slip sensor with 4 targets = 4, pulse/liter to pulse/gal = 3.78) + + + Cycles Per second + + + + + Used in Process DI + + + Timer for long press to reset current day + + + trigger to force reset of current dailydelta if used as water meter etc. + + + Pulse Count from digital input + + + Last count of euTotal from day before + + + + + + + Setpoint + + + Multiplier + + + Rate of Change Max Percent Per Minute + + + + Delay Prevents sudden spikes from demanding pos change + + + Current Position of Device From (atActuator - in_PosAct) + + + Analog Input - in_act := out_eu; + + + Flips the greater then and less then to reverse the demand direction + + + + + + + Actuator Demand - in_autoPos := out_posDem; + + + + + + + + + + + + + + + + + + + Ramping vars + + + + + + + + + + + + + + + + + Keeps last known intensity setpoint + + + + + + + + + + + Feed weigher / mixer + + dump mechanism control + + + Pulse to reset totals at midnight + + + Capacity of the scale. Recipes will use this to calculate amounts + + + Delay time for dump to close (seconds) + + + Wheat demand in percent (0-100) + + + Mixer enable/disable. When disabled mixer alarms also disabled + + + Logger enable. Turn on to enable logging to system log. + + + Reference to an at loadcell + + + Turned on when weigh hopper is empty + + + Start mixing. Is reset to false immediatly + + + List of ingredients + + + Alarm reset + + + Mixer is empty + + + Alarm to indicate it took to long to fill the weigh hopper to the desired weight + + + Alarm to indicate it took to long for the weigh hopper to empty + + + Alarm to indicate there is no premix ingredient defined + + + Total amount mixed today (kg) + + + Delay time in seconds for timeout while filling alarm + + + Delay time in seconds for timout while dumping alarm + + + Active ingredient index + + + Loop variable + + + Array uppder bound + + + Zero weight for the current batch + + + State of the mixer + + + + Time since this state became active + + + + System log writer + + + Wheat is enabled + + + Premix demand in percent (0-100) + + + Internal reset to + + + Auto switch to other bin is pending for the start of the next batch + + + Fill timeout while there is a backup premix has occured + + + Midnight reset trigger + + + Weight in the weigh hopper that is under the weigher + + + Amount of weight to remove from wheigher on each scan during dump + + + used to add some some freefall to the ingredient fill + + + + + + + + + + Filtered output temperature + + + Use Sensor 1 + + + Use Sensor 2 + + + Use Sensor 3 + + + Use Sensor 4 + + + + + + + + + Last value + + + + + + + + This GVL must be initialized before GVL "GloballyForAlarmStorage", because this GVL + causes the initialization of the variable g_stApplicationName. + We only need the date and time format pattern for the converted code, therefore + we can (and must!) omit the rest from conversion + We must not use an attribute to hide this GVL, because there are some variables, + that a developer might use. Additionally it is necessary, that this GVL in considered + in the data server, but not visible for the user, because some variables of this GVL + are added to the data source selection implicitely and for this purpose it is necessary, + that this GVL is a part of the available items tree. + + A global counter, that counts all the alarm state transitions, that occur. + Needed by the alarm table for optimized painting. If this counter doesn't + change during subsequent paint calls, the same alarms have been active and + in the same state. + Conditional show attribute must not be present for this variable, because + some architectural problems it can lead in a not correct regitration +CHECKED_OMIT + + + A similar counter, that will be incremented each time an alarm is written + into the alarm storage. This allows the alarm table to detect, whether + some kind of processing has to be done, because there exists a new alarm. + Conditional show attribute must not be present for this variable, because + some architectural problems it can lead in a not correct regitration +CHECKED_OMIT + + + Counts the times when the alarm table has been deleted. +CHECKED_OMIT + + + + + + List of all devices + + + + + List of all devices + + + + + List of all devices + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + For dialog box selection + + + + + + + + + + + + + Alarm reset + + + Enable simulator mode + + + atTOD settings + + + Project Version + + + + + List of all devices + + + + + + + + + + + + Auger enable + + + + + + + + Wheat mix ration in percent (0-100) + + + + + + System + + + + + + + + + + + + + + + + + Dq's + + + + + + + + + + + + DI's + + + + + + + + + + AI + + + Humidity Control + + + Inlet Conrol + + + Light Control + + + AQ + + + + Mortality + + + + + + + + + Stage Control + + + + + Devices + + + + Temperature Control + + + + + + + + + + + Wheat curve data + + + Wheat curve base + + + + + + + + + + + + + + + + + + + + + Clear all log + + + + + day value for log + + + Daily Dead Record + + + + Humidity log + + + + Ingredient 1 Total + + + Ingredient 2 Total + + + Ingredient 3 Total + + + Mortality % + + + Daily Remaining after Deads + + + + + + Temperature log + + + Total Dead not Including Today + + + Feed usage log + + + Water usage log + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + For the graph on atom HMI + + + For the graph on atom HMI + + + + + \ No newline at end of file diff --git a/Development/cr_barn5.project b/Development/cr_barn5.project new file mode 100644 index 0000000..5daacba Binary files /dev/null and b/Development/cr_barn5.project differ diff --git a/Development/cr_barn5_project.precompilecache b/Development/cr_barn5_project.precompilecache new file mode 100644 index 0000000..e5a5ccc Binary files /dev/null and b/Development/cr_barn5_project.precompilecache differ